REGULAR STORE HOURS: Mon - Fri: 9am - 5.30pm 
BRUSHLESS BORE CLEANER
The primary reason for using any type of cleaning preparation in the barrel of a firearm is to remove those agents left behind which would adversely affect the accuracy of the particular firearm and its use life. It is the removal of these four types of fouling: 1. Powder fouling (smokeless or blackpowder) 2. Metal fouling (copper or lead alloy) 3. Carbon , 4. Molybdenum (usually introduced by the use of Molybdenum coated bullets), which will restore accuracy in a barrel whose usable life is still viable.
WIPE-OUT™ has a unique new applicator tip that prevents Wipe-Out ™ from gushing back out of the barrel. Simply hold the applicator tip against the muzzle or bore guide and apply the Wipe-Out ™ All that is necessary is a short burst. Wipe-Out ™ is designed to rapidly expand into the barrel , like shaving cream. The applicator tip may also be reversed for large caliber firearms or muzzle loading firearms up to 62 caliber. In 60 minutes you return and push a good cotton patch through the barrel. Make sure you have a caliber specific jag. This assures a tight fit, and guarantees cleaning to the very bottom of the grooves.
SPECIAL NOTE FOR ALL SHOOTERS SHOOTING LEAD BULLETS.
The manufacturer specifically states that Wipe-out does not dissolve lead. Most chemicals that dissolve lead produce a galvanic reaction. This reaction in effect acts like a battery. In most cases it will etch steel ( both stainless and carbon steel). It is for this reason they don’t use chemicals that specifically work on lead.
Chemicals are used that will dissolve the other metals ( tin , antimony, zinc, etc.) that are incorporated in most bullet alloys. These work to destroy the integrity of the bullet alloy, and it begins to come apart in small black flakes. This process takes about 24 to 36 hours.
So while Wipe-Out™ does not dissolve lead , it will degrade the alloy so that it can be pushed out with a tight patch.
